Weathertight Impact Rated

Structural & Impact Cycle Tested at DP55

DP55 is for panel sizes up to 3/0 X 8/0
For complete test information go to Test Data Impact DP55

          2 ¼” Clad door

3 times stronger than a standard 1 ¾” door

LVL poplar styles for superior strength

Extruded aluminum cladding for durability

Pine interior standard but other wood types are available

Bronze and White are standard but other colors are available

1” Impact – Insulated Low E Glass

.090 inner layer between the 2 exterior pieces of glass provides impact resistance

Low E Coating on the interior tempered glass provides energy efficiency.

For energy values go to Test Data Impact DP55.


Seam Shieldseam-shield

3 strips of weather strip between each door ensures water and air can’t penetrate

The color-matched seam shield covers the exterior gap to block wind and driving rain

 

Larger Hardware

Hardware designed specifically for 2 ¼” doors
Carries the weight of the doors from a top track- no weight carried at the bottom
Easy to install and maintain
Up and down adjustment at each carrier
Side to side adjustment at the corner pivots
All stainless steel construction guarantees years of performance
Available in Dark Bronze or Brushed Stainless Steel
See handsets and finishes at Folding Door Hardware Information

Threshold Options

Threshold selection affects the appearance and the performance of folding doors.  Careful attention should be given to the level of water and air infiltration resistance you want the door system to have.

The DP rating for a threshold indicates the Design Pressure test it passed for water infiltration.  During testing a vacuum is pulled on the interior of the door system while water is sprayed on the exterior.  The higher the DP rating the stronger the vacuum was during testing.

Weathertight Impact High-Dam DP55 Structural  |  DP55 Water Resistance
weather-im-act-high-dam

3 3/8" interior height x 8" in width
Double line of weather strip against the interior of the door
Includes a door sweep on the bottom of the door
Drain return system allows any water getting into the track to drain out

Best for water & air infiltration resistance
Out-Swing Only
Weathertight Impact DP55 Structural  |  DP35 Water Resistance
weather-im-act-high-dam

2 5/8" Interior height x 8" in width
Single line of weather strip against the interior of the door
Drain return system allows any water getting into the track to drain out

Good for water & air infiltration resistance
Out-Swing Only
Low-Rise Impact DP55 Structural  |  No DP water rating
weather-im-act-high-dam

1 ¾" interior height X 8" in width
Standard on in-swing impact systems
Includes a door sweep on the bottom of the door
Drain return system allows any water getting into the track to drain out

Good for water & air infiltration resistance - not pressure tested
In-Swing or Out-Swing
In-Floor Track Impact DP55 Structural  |  No DP water rating
Door Hardware Stainless Steel

1 ½" X 2" wide, may require recess in sub-floor
Finished floor to be installed on both sides
Includes cut-pile on the bottom of the door
Air & light infiltration is dependent on uniformity of floor finish
No drain system is incorporated into track

NO water & air infiltration resistance
In-Swing or Out-Swing